// Code generated by smithy-go-codegen DO NOT EDIT.

package s3

import (
	"context"
	"fmt"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/aws/signer/v4"
	internalChecksum "github.com/aws/aws-sdk-go-v2/service/internal/checksum"
	s3cust "github.com/aws/aws-sdk-go-v2/service/s3/internal/customizations"
	"github.com/aws/aws-sdk-go-v2/service/s3/types"
	"github.com/aws/smithy-go/middleware"
	"github.com/aws/smithy-go/ptr"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// This operation is not supported for directory buckets.
//
// Sets the configuration of the website that is specified in the website
// subresource. To configure a bucket as a website, you can add this subresource on
// the bucket with website configuration information such as the file name of the
// index document and any redirect rules. For more information, see [Hosting Websites on Amazon S3].
//
// This PUT action requires the S3:PutBucketWebsite permission. By default, only
// the bucket owner can configure the website attached to a bucket; however, bucket
// owners can allow other users to set the website configuration by writing a
// bucket policy that grants them the S3:PutBucketWebsite permission.
//
// To redirect all website requests sent to the bucket's website endpoint, you add
// a website configuration with the following elements. Because all requests are
// sent to another website, you don't need to provide index document name for the
// bucket.
//
//   - WebsiteConfiguration
//
//   - RedirectAllRequestsTo
//
//   - HostName
//
//   - Protocol
//
// If you want granular control over redirects, you can use the following elements
// to add routing rules that describe conditions for redirecting requests and
// information about the redirect destination. In this case, the website
// configuration must provide an index document for the bucket, because some
// requests might not be redirected.
//
//   - WebsiteConfiguration
//
//   - IndexDocument
//
//   - Suffix
//
//   - ErrorDocument
//
//   - Key
//
//   - RoutingRules
//
//   - RoutingRule
//
//   - Condition
//
//   - HttpErrorCodeReturnedEquals
//
//   - KeyPrefixEquals
//
//   - Redirect
//
//   - Protocol
//
//   - HostName
//
//   - ReplaceKeyPrefixWith
//
//   - ReplaceKeyWith
//
//   - HttpRedirectCode
//
// Amazon S3 has a limitation of 50 routing rules per website configuration. If
// you require more than 50 routing rules, you can use object redirect. For more
// information, see [Configuring an Object Redirect]in the Amazon S3 User Guide.
//
// The maximum request length is limited to 128 KB.
//
// You must URL encode any signed header values that contain spaces. For example,
// if your header value is my file.txt , containing two spaces after my , you must
// URL encode this value to my%20%20file.txt .
//
// [Hosting Websites on Amazon S3]: https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html
// [Configuring an Object Redirect]: https://docs.aws.amazon.com/AmazonS3/latest/dev/how-to-page-redirect.html
func (c *Client) PutBucketWebsite(ctx context.Context, params *PutBucketWebsiteInput, optFns ...func(*Options)) (*PutBucketWebsiteOutput, error) {
	if params == nil {
		params = &PutBucketWebsiteInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "PutBucketWebsite", params, optFns, c.addOperationPutBucketWebsiteMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*PutBucketWebsiteOutput)
	out.ResultMetadata = metadata
	return out, nil
}

type PutBucketWebsiteInput struct {

	// The bucket name.
	//
	// This member is required.
	Bucket *string

	// Container for the request.
	//
	// This member is required.
	WebsiteConfiguration *types.WebsiteConfiguration

	// Indicates the algorithm used to create the checksum for the request when you
	// use the SDK. This header will not provide any additional functionality if you
	// don't use the SDK. When you send this header, there must be a corresponding
	// x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the
	// request with the HTTP status code 400 Bad Request . For more information, see [Checking object integrity]
	// in the Amazon S3 User Guide.
	//
	// If you provide an individual checksum, Amazon S3 ignores any provided
	// ChecksumAlgorithm parameter.
	//
	// [Checking object integrity]: https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html
	ChecksumAlgorithm types.ChecksumAlgorithm

	// The Base64 encoded 128-bit MD5 digest of the data. You must use this header as
	// a message integrity check to verify that the request body was not corrupted in
	// transit. For more information, see [RFC 1864].
	//
	// For requests made using the Amazon Web Services Command Line Interface (CLI) or
	// Amazon Web Services SDKs, this field is calculated automatically.
	//
	// [RFC 1864]: http://www.ietf.org/rfc/rfc1864.txt
	ContentMD5 *string

	// The account ID of the expected bucket owner. If the account ID that you provide
	// does not match the actual owner of the bucket, the request fails with the HTTP
	// status code 403 Forbidden (access denied).
	ExpectedBucketOwner *string

	noSmithyDocumentSerde
}

func (in *PutBucketWebsiteInput) bindEndpointParams(p *EndpointParameters) {

	p.Bucket = in.Bucket
	p.UseS3ExpressControlEndpoint = ptr.Bool(true)
}

type PutBucketWebsiteOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationPutBucketWebsiteMiddlewares(stack *middleware.Stack, options Options) (err error) {
	if err := stack.Serialize.Add(&setOperationInputMiddleware{}, middleware.After); err != nil {
		return err
	}
	err = stack.Serialize.Add(&awsRestxml_serializeOpPutBucketWebsite{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsRestxml_deserializeOpPutBucketWebsite{}, middleware.After)
	if err != nil {
		return err
	}
	if err := addProtocolFinalizerMiddlewares(stack, options, "PutBucketWebsite"); err != nil {
		return fmt.Errorf("add protocol finalizers: %v", err)
	}

	if err = addlegacyEndpointContextSetter(stack, options); err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addClientRequestID(stack); err != nil {
		return err
	}
	if err = addComputeContentLength(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = addComputePayloadSHA256(stack); err != nil {
		return err
	}
	if err = addRetry(stack, options); err != nil {
		return err
	}
	if err = addRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = addRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addSpanRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addClientUserAgent(stack, options); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addSetLegacyContextSigningOptionsMiddleware(stack); err != nil {
		return err
	}
	if err = addPutBucketContextMiddleware(stack); err != nil {
		return err
	}
	if err = addTimeOffsetBuild(stack, c); err != nil {
		return err
	}
	if err = addUserAgentRetryMode(stack, options); err != nil {
		return err
	}
	if err = addIsExpressUserAgent(stack); err != nil {
		return err
	}
	if err = addRequestChecksumMetricsTracking(stack, options); err != nil {
		return err
	}
	if err = addCredentialSource(stack, options); err != nil {
		return err
	}
	if err = addOpPutBucketWebsiteValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opPutBucketWebsite(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addMetadataRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addRecursionDetection(stack); err != nil {
		return err
	}
	if err = addPutBucketWebsiteInputChecksumMiddlewares(stack, options); err != nil {
		return err
	}
	if err = addPutBucketWebsiteUpdateEndpoint(stack, options); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = v4.AddContentSHA256HeaderMiddleware(stack); err != nil {
		return err
	}
	if err = disableAcceptEncodingGzip(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	if err = addDisableHTTPSMiddleware(stack, options); err != nil {
		return err
	}
	if err = addSerializeImmutableHostnameBucketMiddleware(stack, options); err != nil {
		return err
	}
	if err = s3cust.AddExpressDefaultChecksumMiddleware(stack); err != nil {
		return err
	}
	if err = addInterceptBeforeRetryLoop(stack, options); err != nil {
		return err
	}
	if err = addInterceptAttempt(stack, options); err != nil {
		return err
	}
	if err = addInterceptors(stack, options); err != nil {
		return err
	}
	return nil
}

func (v *PutBucketWebsiteInput) bucket() (string, bool) {
	if v.Bucket == nil {
		return "", false
	}
	return *v.Bucket, true
}

func newServiceMetadataMiddleware_opPutBucketWebsite(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		OperationName: "PutBucketWebsite",
	}
}

// getPutBucketWebsiteRequestAlgorithmMember gets the request checksum algorithm
// value provided as input.
func getPutBucketWebsiteRequestAlgorithmMember(input interface{}) (string, bool) {
	in := input.(*PutBucketWebsiteInput)
	if len(in.ChecksumAlgorithm) == 0 {
		return "", false
	}
	return string(in.ChecksumAlgorithm), true
}

func addPutBucketWebsiteInputChecksumMiddlewares(stack *middleware.Stack, options Options) error {
	return addInputChecksumMiddleware(stack, internalChecksum.InputMiddlewareOptions{
		GetAlgorithm:                     getPutBucketWebsiteRequestAlgorithmMember,
		RequireChecksum:                  true,
		RequestChecksumCalculation:       options.RequestChecksumCalculation,
		EnableTrailingChecksum:           false,
		EnableComputeSHA256PayloadHash:   true,
		EnableDecodedContentLengthHeader: true,
	})
}

// getPutBucketWebsiteBucketMember returns a pointer to string denoting a provided
// bucket member valueand a boolean indicating if the input has a modeled bucket
// name,
func getPutBucketWebsiteBucketMember(input interface{}) (*string, bool) {
	in := input.(*PutBucketWebsiteInput)
	if in.Bucket == nil {
		return nil, false
	}
	return in.Bucket, true
}
func addPutBucketWebsiteUpdateEndpoint(stack *middleware.Stack, options Options) error {
	return s3cust.UpdateEndpoint(stack, s3cust.UpdateEndpointOptions{
		Accessor: s3cust.UpdateEndpointParameterAccessor{
			GetBucketFromInput: getPutBucketWebsiteBucketMember,
		},
		UsePathStyle:                   options.UsePathStyle,
		UseAccelerate:                  options.UseAccelerate,
		SupportsAccelerate:             true,
		TargetS3ObjectLambda:           false,
		EndpointResolver:               options.EndpointResolver,
		EndpointResolverOptions:        options.EndpointOptions,
		UseARNRegion:                   options.UseARNRegion,
		DisableMultiRegionAccessPoints: options.DisableMultiRegionAccessPoints,
	})
}